How to Power Xbox One Without Brick

Is your Xbox One power brick malfunctioning? Do you want to power your Xbox One without brick?

You’re in the right corner of the Internet.

Xbox One is an incredibly powerful gaming system that provides gamers with tremendous gaming opportunities.

But what if your Xbox One power brick starts to malfunction which provides current to Xbox?

No worries, we’re here to help.

Previously, we discussed how to fix Xbox Cloud Gaming  & Xbox Series X’s black screen errors.

In today’s article, we will demonstrate how to power Xbox One without a brick. In addition to this, we will show you how to power Xbox One with USB Type C.

Let’s dive in.


How to power Xbox One without Brick

Short Answer: You can power your Xbox One without using a power brick because Xbox One has its own power inside. However, if you wish to connect your Xbox One controller to a computer, then you’ll need the power brick.

Xbox One Power Brick
Source: Amazon

Here are some ways to power Xbox One without a power brick.

Method#1: Reset your Xbox One Power Brick

First things first, we will try to revive Xbox One power brick. If your Power Brick starts to malfunction, you can reset it to make it go back to normal. 

Here’s how you can do it:

  • Step 1: Take out the Power Brick by unplugging it from the wall outlet and the console
  • Step 2: Wait for about 30 seconds
  • Step 3: Plug the power cable into the power brick and the wall outlet, but don’t connect it to the console yet
  • Step 4: Look at the LED light on the power brick. If it’s Green (which is usually the case), connect the other end of the cable to your console.
  • Step 5: Your Console should start working normally now.

If the Xbox One power brick continues to malfunction, move on to the next method.


Method#2: Reset your Xbox One

If the power brick isn’t working, then try performing a good old reset on your Xbox One.

Here’s how you reset your Xbox One system.

  • Step 1: Go to “Settings” by clicking the Xbox icon
  • Step 2: Next, choose “Console Info” or “Reset Console”
  • Step 3: Lastly, tap on “Reset and Erase Everything”

By following these steps, you’ll be able to power your Xbox One without a power brick.


Method#3: Power Cycle your Xbox One

If your Xbox One refuses to turn on, you can try performing a power cycle on it. This step can be very useful as it helps to drain any stored energy. 

Although it might sound technical, it’s actually a simple method that can help solve the problem.

Here’s how you power cycle your Xbox One:

  • Step 1: Disconnect your Xbox One from the power outlet
  • Step 2: Unplug all the console cords
  • Step 3: Leave your Xbox One alone for a few seconds until the Orange Light goes away
  • Step 4: Plug the cords in and Re-Connect your Xbox one

After power cycling, turn your Xbox One on and see if the issue resolves.


Method#4: Unplug the Cables

If you can’t find a way out, you can try unplugging the cord that connects the brick or the game console.

To power your Xbox One without a brick, follow these simple steps. 

  • Step 1: Disconnect the cord that goes into to game console or brick
  • Step 2: When it stops making noise, put the cord partially into the adapter. 
  • Step 3: Then, if the Orange Light on the power supply Turns On, gently move the plug. 
  • Step 4: If that happens, you can turn the Console Off and On again.

That’s it. This a quick and easy way to power your Xbox One without a power brick.


Method#5: Improve the Airflow System

Sometimes, the Xbox One brick can act strange if it gets too hot. If your Xbox One won’t turn on, try enhancing the ventilation system.

To fix this, you need to do a few things. 

  • Step 1: First, Turn Off your Xbox. 
  • Step 2: Then, Find a Cool Place for your console where the air can move around it. 
  • Step 3: Wait for about an Hour
  • Step 4: After that, you can Turn On your Xbox again and it should work better.

Method#6: Check for Power Surges

The power brick is designed to protect your expensive console from problems with the electricity in your house. If there are issues with the power supply, the power brick won’t let the power pass through. 

If you think there are power fluctuations, it’s important to contact your utility company to fix them. You can also unplug devices that use a lot of power from the wall. Check the lights in your house to see if they flicker or turn off during severe power outages. 


Method#7: Use YCCSKY Power Brick

It’s important to note that using your Xbox One without a brick is challenging. So, you might need to fix or replace the brick.

If you’re considering buying a power brick, we recommend buying a YCCSKY Power Brick. The main reason to buy from YCCSKY is that their power brick is much quieter than any other option available, whether official or third-party. It also has the highest user reviews compared to other third-party bricks.

YCCSKY Power Brick
Source: Amazon

Why YCCSKY?

YCCSKY has fixed the loudness problem which was a major flaw in the original power brick design. They have also improved the cooling fan’s design, making it more effective. This means the gadget won’t overheat as often and will last longer, making YCCSKY’s version the best choice for you.


Method#8: Contact Customer Support

The best and final option to guarantee a solution is to contact Xbox Customer Support. They are experts who can help you with any issues you’re facing with your Xbox One.


How to power Xbox One with USB Type C

If your Xbox One power brick is not working, then fret not! You can power your Xbox One with the USB Type C power bank instead. 

But there’s bad news and good news!

The bad news is you don’t get any USB ports on your Xbox One.

Such a bummer!

The good news is you can use USB-C to power your Xbox One with the help of a ZY12PDN USBC trigger board.

Here’s how it works:

  • Step 1: Press and hold the button to set the default voltage
  • Step 2: Then, plug in the USB-C Power
  • Step 3: Press the button until you get your desired Voltage (Red=5V, Yellow=9V, Green=12V, Cyan=15V, Blue=20V)
  • Step 4: Lastly, hold the button down to Save your choice

ZY12PDN USB-C Trigger Board

There you have it! If you don’t have a power brick, use USB-C to power your Xbox One.

NOTE: Your Xbox needs 12 volts of current to work efficiently.


SEE ALSO:


Wrapping Up:

Here you go! That’s how you power your Xbox One without a brick and by using USB-C.

In this article, we’ve provided a step-by-step guide to power your Xbox One. By carefully following the steps mentioned above, you’ll be able to get your Xbox One back on track.

So, why wait? Power your Xbox One now and resume your seamless gaming experience.

Share This Article
Follow:
An experienced technical writer who specializes in simplifying technical jargon. Being a lifelong learner, she stays up-to-date with the latest trends and tools in the world of technology. When she’s not writing technical stuff, you can find her reading self-help books.