Is your Now TV remote not working after changing the battery?
If your Now TV remote not working after changing the battery you have landed on the right page. Here, we have provided the reasons why it may happen and how to fix it.
So, let’s get started.
The Now TV remote can be used in most situations with little difficulty. It is possible that the initialization process will take some time when you first set up your Now TV stick or box for the first time. However, you shouldn’t have any trouble using the remote with your streaming device right away.
It’s effectively a Roku remote, which is the software platform that Now TV uses in the UK. If you’re familiar with Roku, you’ll know what we are talking about. As far as smart sticks go, it’s one of the better ones since not only is the operating system well built, but also the layout is straightforward and easy to browse.
However, even after replacing the battery in your Now TV remote, you may still experience problems with it functioning improperly on occasion. In the event that it does cease performing as it should, the following are some of the steps that you will want to take.
Why is Now TV remote not working after changing the battery?
Short answer: Now TV remote not working after changing the battery because the buttons are stuck, the remote is not paired properly, or there is a signal obstruction.
There is no doubt that Now TV has brought the convenience of accessing entertainment to a whole new level. The corporation has its headquarters in the United Kingdom and is owned by Sky, which is a British supplier of satellite television.
It is a firm that operates on a subscription basis and employs a Now TV control in conjunction with a stick. People will occasionally report that the Now TV Remote is not functioning properly. Don’t worry about it though since we’ve got you covered.
If your remote continues to malfunction even after you have replaced the battery in it, there are a few alternative approaches that you can take to troubleshoot and fix the issue. This may involve anything as simple as restarting your Now TV device or something as involved as doing a complete factory reset.
There could be a number of issues for your Now TV remote to stop functioning properly. However, the following is a list of the most common among them:
Reason 1 – Buttons are stuck
It’s possible that the buttons on your Now TV remote will become jammed or malfunction occasionally. It is possible that this is the cause of the problem you are having with your Now TV remote. Examine the remote for any signs of physical damage that could have occurred.
Reason 2 – The remote is not paired correctly
Any remote, in order for it to communicate with a Smart TV, needs to have the correct pairing. It is possible that you will be unable to use your Now TV remote if it has not been properly paired with your television.
Reason 3 – Signal Blockage
Your TV’s remote control won’t function properly if there is any interference, whether it be electromagnetic or physical, between it and the TV.
In order for your TV remote to correctly detect infrared signals, try removing any electrical equipment that is in the way, as well as any physical obstructions that may be in the way.
How to Fix Now TV remote not working after changing the battery
Sometimes the issue at hand is quite unimportant; but, if you are unable to find a solution to it, it might give you a terrible headache.
Problems are inevitable, as is the case with every single item. The Now TV remote is notorious for malfunctioning.
Your Now TV membership is useless because you are unable to use the service. However, hey! There are a few different approaches that you can take to attempt to solve this issue once and for all. To that end, let’s not waste any more time!
Method 1 – Re-pair your remote
Have you considered using a Now TV stick or box to attempt to fix your Now TV remote? If you haven’t already tried this, it may be the solution to the problem you’re having.
It’s possible that this information is already common knowledge, but your Now TV remote has a hidden pairing button on the back of it, most likely concealed by the rear cover.
This remote can assist you in repairing the Now TV remote with the streaming device so that you can use both of them. This is how you can go about doing it:
- Step 1– First restart the device.
- Step 2– Take off the rear cover, and then remove the batteries from inside.
- Step 3– Locate the tiny black button that is located on the back of your Now TV remote.
- Step 4– Maintain the press for somewhere between 5 and 10 seconds.
- Step 5– The procedure for pairing will start, and its completion will take around one minute.
Your Now TV remote will flash to let you know when the two devices have successfully paired with one another. The flash will stop once both have been matched up with one another. Check to see whether it is working now.
Method 2 – Power Cycle your Now TV stick
The power cycle can be thought of as a gentle form of restarting or resetting the Now TV stick. It has been demonstrated that cycling the power supply can solve any potential issues that may arise in smart devices.
You have no idea where to start, do you? Don’t freak out about it. You don’t need to worry about a thing. Detailed instructions are provided below.
- Step 1- Take your Now TV stick away from the television and disconnect it.
- Step 2– Now disconnect the cord that supplies electricity to the stick remote from the power source.
- Step 3- Wait for about a minute and a half.
- Step 4- Reconnect the device.
Taking the batteries out of your remote control before doing a power cycle and then putting them back in after the cycle is complete is one option that could be helpful.
Method 3 – Find the stuck button
It could be something as basic as a button that’s been stuck. Because of the button that is stuck, you won’t be able to use your Now TV remote. It makes it more difficult to connect remotely.
The solution to the problem appears to be simple, however, at times it can be difficult to locate the naughty button. To quickly determine which of the buttons is malfunctioning, you can try pressing each one of them in turn to isolate the problem.
Remove anything that might be causing a physical blockage in that button, such as any dirt or debris that might be caught in there. Examine the remote control to see if it is operational.
Method 4 – Power Reset your Now TV remote
In this particular scenario, performing a factory reset could prove to be advantageous because it gets rid of several issues. This will assist in decluttering the area and will erase all of the data on your Now TV remote.
Erasing data from your Now TV remote will cause it to revert to the factory default settings. This is how you can go about doing it:
- Step 1– The first thing you should do is take out the batteries from your Now TV remote.
- Step 2– Find the button that resets the device.
- Step 3– You should press and hold it for around 15–20 seconds.
- Step 4– After about a minute, you should replace the batteries in their original location.
- Step 5– Check to see whether it still works after you have paired it with the stick.
- Step 6– Maintain close proximity between the remote and the stick.
- Step 7– Put the Now TV Stick’s user interface on the default home screen.
Method 5 – Restart the Box
If you aren’t one of the many individuals who have already tried it, then you should try this one instead because it’s not as difficult as the other one. The method described here is the one that we suggest using.
- Step 1– Take the batteries out of your Now TV remote’s battery compartment.
- Step 2– At this point, you should detach your Now TV stick from the power supply.
- Step 3– After one minute, plug it back in.
- Step 4– The process of initialization will take some time.
- Step 5– After the initialization is finished, you should replace the batteries in the remote and check to see if it still functions properly.
Method 6 – Check your wi-fi
There’s basically only one other thing that can go wrong with a Now TV stick or box when you’re attempting to set it up or use it. Following the initial configuration, communication between the device and the remote should be seamless.
Moreover, it should automatically pair with your TV. In theory, once linked, this should allow you to adjust the volume on your television.
If your remote control isn’t responding, it’s possible that your Wi-Fi is malfunctioning. If your Now TV isn’t connecting to the internet, you may need to check your account settings to see which wifi network it is currently associated with.
FAQs
Q1- Why did my Now TV remote suddenly stop working?
There is a wide variety of potential causes for your remote’s lack of functionality. The most typical causes include physical damage, problems with the batteries or pairing, problems with the infrared sensor on the remote or TV, or problems with the pairing.
Q2- Where is the reset button on the Now TV remote?
You can locate the button to reset your Smart Stick on the side of the device. Simply pressing the button once will cause your Smart Stick to resume in its current state.
Final Words
Solving this sort of issue is simple. You don’t need to be a pro to solve such a simple issue. Just follow the guide and give the methods a shot, and your Now TV remote should start working again even then if it doesn’t work then you should contact the Now TV help center for further assistance.
Further Reading:
How to get Now TV on Sky (2022)
Fix Now TV keeps losing internet connection
(4 Ways) Fix : Now TV Broadband Not Working (2022)
How to Fix Now TV Stick Remote Not Working (2022)
Technical writer and avid fan of cutting-edge gadgetry, Abhishek has authored works on the subject of Android & iOS. He’s a talented writer who can make almost any topic interesting while helping his viewers with tech-related guides is his passion. In his spare time, he goes camping and hiking adventures.
