JVC TVs come with a remote that can control the volume as well as other features, and this remote is both effective and easy to use. But what should you do if the remote stops working or if you misplace it in some way? Your watching experience will not be limited to a single volume level as a result, which is a fortunate development.
There are a few other methods to use the remote control to change the volume on your JVC television. Here are a few suggestions for you to think about.
Without a remote, you must utilize the buttons on the back of your JVC TV. The bottom left corner of your TV has all the controls, including the volume.
How to turn up the volume on JVC TV without remote
Have you recently been experiencing issues with your JVC TV remote? It’s possible that the batteries in the remote need to be replaced, or maybe you just need an entirely new remote.
A quick and easy method for adjusting the volume on the television is required while you figure out what the issue is and look for a solution to it. When watching a movie in this day and age, it is almost unavoidable to have one finger on each of the volume controls.
The music is playing at full volume one moment, and the next, you are unable to make out a single word that anyone is saying. In light of this, give the following potential fixes a shot in the event that you do not have access to the remote or if it is not operating properly.
It is typically more convenient to control the volume using the buttons that are allocated for that purpose when you are standing close to the television. It is not necessary to search for the remote control under the couch cushions because all you have to do is repeatedly press the button to either increase or decrease the volume.
Where are the volume buttons on a JVC TV
Short answer: The volume buttons on a JVC TV are on the back side of the TV’s panel.
The developers of the JVC software controls have provided the user with the ability to make all of their selections without the use of a remote control by incorporating a method or a combination of buttons within the interface.
If you do not have a remote for your JVC TV, you will need to make use of the buttons that are located on the back of your television panel. The control buttons for your TV can be found in the bottom left corner, and they give you complete capability over ALL of the available settings, including the volume.
If you look behind the TV, you’ll probably find the volume controls tucked away on the sides. All you have to do to adjust the volume is push the button to either increase or decrease the volume a few times.
How to control on functions of a JVC TV without a remote
The challenging aspect was figuring out how to adjust the volume on the JVC TV without using the remote. The control over the functions of a JVC television that does not have a remote will be covered in the next section, and we will ensure that users cannot make any mistakes by following the procedures.
Method 1 – Turn the smartphone into remote
Downloading an application that controls the device can be the most effective and time-saving alternative to using the remote control that came with your JVC television set.
There are a lot of programs that can act as “universal remotes,” and you really ought to test out some of them.
Here is how it works:
On your mobile smartphone:
- Step 1– Launch either Google Play or the Apple App Store.
- Step 2– Find ‘Universal TV Remote’ by typing it into the search bar.
- Step 3– Select ‘JVC TV’ from the menu of the app.
- Step 4– For confirmation, press the button labeled Menu TV.
- Step 5– You should start controlling your TV as if it were a remote control.
You won’t need to use the buttons on the back panel of your JVC TV after you’ve reached that point. By using the digital remote that is contained within your smartphone, you will have an easier time navigating through the options.
Because of the one and only restriction, which is that both devices need to be linked to the same WiFi network, this method is not suitable for the initial setup.
Method 2 – Use the Google Home App
In order to get the most out of their viewing experience, owners of older JVC TV models may also rely on devices that are compatible with Chromecast.
You can stream video and operate the on-screen functionalities of a JVC TV using the Google Home app if you have a Chromecast, which is a relatively inexpensive piece of hardware. In the event that you have never been through the setup procedure before, the steps are as follows:
- Step 1– Simply insert the Chromecast dongle into the HDMI port on the JVC TV.
- Step 2– You can get the Google Home app for your iOS or Android device by downloading and installing it.
- Step 3– Choose the option that reads ‘Set up new devices in your house’, and then follow the on-screen instructions that appear.
Every time you open the Google Home app on your device after it has been connected to Chromecast, you will see an icon for JVC TV appear in its place.
SEE ALSO:
Fix: JVC TV Keeps Going To The Home Screen
Fix: JVC TV Vertical/Horizontal Green Line Problem
Why Won’t My JVC TV Connect To The Internet?
Final words
We are now aware of how to program a JVC television without the use of a remote control and how to install a digital remote control on our smartphones.
The bottom line is that the remote control is just an accessory, which means that losing one is not a huge deal even though it is inconvenient.
Technical writer and avid fan of cutting-edge gadgetry, Abhishek has authored works on the subject of Android & iOS. He’s a talented writer who can make almost any topic interesting while helping his viewers with tech-related guides is his passion. In his spare time, he goes camping and hiking adventures.
