Are you having trouble with your Insignia TV remote?
Does it seem like only the power button is working? Don’t despair!
With just a few simple steps, you can get your remote back up and running in no time. Read on to find out how!
Why does only the power button work on my insignia remote
Short answer: The most common reason only the power button works on an Insignia Remote is that the remote’s batteries are running low and need to be replaced. Other possible causes include a broken connection between the remote and the TV, a malfunctioning remote, or a blocked signal between the remote and the TV.
Having a remote that only powers on your device can be incredibly frustrating. If you have an Insignia remote and can only use the power button, there could be a few different reasons. In this article, we’ll discuss why the power button is the only one that works on your Insignia remote and the reasons behind it.
Reason 1: Batteries need to be changed.
The most common cause of a remote not working is that the batteries need to be changed. First, check the batteries in the remote and ensure they are fresh and properly inserted. If the batteries are not new or inserted correctly, replace them with new ones and ensure they are correctly inserted.
Reason 2: Buttons are stuck
If the batteries are fresh, the next step is to check the buttons. If a button is stuck, it could be causing the other buttons not to work. Press each of the buttons gently to make sure none of them are stuck. If any of the buttons are stuck, try to dislodge them carefully.
Reason 3: Remote is damaged
The remote could be damaged if the batteries are fresh and the buttons are not stuck. This could be due to a manufacturing defect, water damage, or physical damage. Try using another device to check if the remote is damaged.
If it works with another apparatus, the issue is likely with the device you are trying to control. The remote could be damaged and replaced if it does not work with the other device.
Reason 4: The Remote is not compatible with the device.
Insignia remotes are designed to work with certain types of TVs, so if your TV is not one of these models, the remote may not work. To check if the remote is compatible, look at the back of the remote to see if it has a compatibility list. If your TV is listed, then the remote should be able to control your TV.
Reason 5: TV settings are incorrect.
The cause is that the TV settings are incorrect. For example, if the TV is set to a different input than the one the Remote is designed to control, it will not be able to do its job. Please go into the TV’s settings and make sure that the correct input is selected.
Reason 6: The Remote is not in the correct mode.
Maybe the remote is not in the correct mode. Many Insignia remotes have several different ways, and the remote must be the right way for it to work. To check the way, look at the back of the remote and ensure it is set to the desired mode.
Reason 7: The Remote is out of range.
Check if the Remote is within range of the TV. The infrared signal won’t reach the TV if the Remote is too far away. Ensure you’re holding the remote no more than 10 feet away from the TV.
Reason 8: The infrared sensor on the TV is blocked.
If the Remote is within range, the next thing to check is if the infrared sensor on the TV is blocked. To prevent this, stand in front of the TV and point the Remote at the TV. The infrared sensor is likely blocked if you don’t see a tiny red light appearing from the remote when you press a button.
Reason 9: Remote is malfunctioning
The main thing to determine is if the remote is malfunctioning. Insignia remotes can malfunction due to wear and tear or a battery issue. If you suspect that the remote is malfunctioning, the best course of action is to replace it.
Reason 10: The Remote is not programmed correctly.
Maybe the remote is not programmed correctly. Insignia remotes must be programmed to the specific make and model of the TV they are controlling. This can be done by following the instructions in the manual that came with your Remote.
Reason 11: Several obstructions between the remote and the TV
If the Remote is programmed correctly, then the issue is that the remote is not sending signals correctly. This could be due to either an obstruction between the remote and the TV or the Remote’s motion being too weak. If there is an obstruction, try moving furniture and other objects out of the way. If the call is invalid, try replacing the batteries in the remote.
If you have tried all the above steps and your Insignia Remote is still only responding to the power button, it may be time to consult a professional. Contact Insignia’s customer service for further assistance.
What to do: Insignia TV remote is not working except power button
Many users have reported that their Insignia TV remote is not working except for the power button. Fortunately, you can take a few simple steps to get your remote back up and running. Read on to learn how to troubleshoot and fix your Insignia TV remote.
Fix 1: Test the batteries
One of the most common causes of a remote not working correctly is a dead or weak set of batteries. To test the batteries, remove them from the remote and use a multimeter to measure their voltage. If the voltage exceeds 1.5 volts, the batteries need to be replaced.
Fix 2: Ensure the Remote is in Line of Sight to the TV
The Infrared (IR) signal emitted by the Insignia remote must be in direct sight of the TV’s IR receiver.
Check to ensure there are no obstructions between the remote and the TV. If the Remote is used in a dark room, you may need to turn on a light for the IR signal to be visible to the TV.
Fix 3: Check if the Remote is Synced to the TV
If the remote is not synced to the TV, it won’t be able to control it. To check if the Remote is synced to the TV, open the TV’s menu and select the “Remote Control” option. If the remote is listed in the menu, it is synced to the TV. If not, follow the instructions to sync the Remote.
Fix 4: Press the “Menu,” “Left,” and “Back” buttons
Try this shortcut by pressing the “Menu,” “Left,” and “Back” buttons on the Remote in sequence. This will reset the remote and may fix the issue.
Fix 5: Clean the infrared receiver on the TV
If the remote is still not working, the next step is to clean the infrared receiver on the TV. This is the area on the TV where the remote sends its signal. Use a cloth to wipe the lens free of dust or debris carefully. This may restore the connection and enable the remote to work again.
Fix 6: Check if the remote is damaged
Finally, if the Remote is still not working, you should check if it is damaged. Look for any physical signs of damage, such as cracks or loose buttons. If the remote is damaged, it may need to be replaced.
Fix 7: Check If the Buttons Are Stuck
Check if any of the buttons on your remote are stuck. This is a common issue that can cause your remote to stop working. To check for stuck buttons, remove the back cover of your remote and press each button down several times.
If any buttons are stuck, carefully use a small object, such as a paperclip or toothpick, to free them. Once you’ve done this, put the back cover on and try your remote again.
Fix 8: Use a Dedicated Reset Button
Insignia TVs come with a dedicated reset button on the back. To reset your remote, press and hold the reset button for 3-5 seconds. This will cause the remote to reset, and it should get working again.
Fix 9: Get a New Remote
If your Remote isn’t working after trying the above steps, it may be time to get a new remote. You can purchase a replacement remote from your local electronics store or online. If you’re unsure which remote to buy, consult your TV’s user manual for more information.
SEE ALSO:
Fix: Insignia TV Input Source Problem
Why Insignia TV Flashes On And Then Goes Black [7 Fixes]
7 Ways To Fix: Insignia TV HDMI Not Working
Final words
The Insignia TV remote is a valuable tool for controlling your TV. Unfortunately, when the remote stops working, it can be a frustrating experience. If your Remote is not working except for the power button, there are a few steps you can take to troubleshoot the issue. First, try replacing the batteries or cleaning the battery contacts.
If that doesn’t work, you may need to reset the remote or buy a new one. Whatever the case, it’s essential to take the necessary steps to ensure your Remote is functioning correctly to take full advantage of your Insignia TV.
A content writer with a B.Tech degree from Kalinga University, Saksham Jamwal, has a passion for writing. His favorite genre to write about is the ‘daily use devices’ and ‘social media’. He has worked on multiple projects ranging from blog posts to product reviews and loves to connect with people through his writing. Saksham is a creative and motivated individual who strives to produce informative and relatable content.
